Deteil :
#Read_Info_By_CM2
Operation : Check/Read Info [ v1.26 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 44 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : v130_trx_0b1
Model Brand : EVERCOSS A74C
Model Device: v130_trx_0b1
AndrVersion : 4.4.2
BaseBand CPU: V130_TRX_0B1
CompileDate : 15/06/2015 02:33:23
Project Ver : KOT49H 14B_test-keys
Model Ext : EVERCOSS A74C
ExtraInfo : HWInfo not exists, normal phone
Elapsed: 00:00:39
Reconnect Power/Cable!
#Read_Firmware_By_CM2
Operation : Read FullFlash [ v1.26 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 44 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 44 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 44 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : v130_trx_0b1
Model Brand : EVERCOSS A74C
Model Device: v130_trx_0b1
AndrVersion : 4.4.2
BaseBand CPU: V130_TRX_0B1
Project Ver : KOT49H 14B_test-keys
Model Ext : EVERCOSS A74C
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 658 MiB
Saved to : C:\BACKUP SPREADTRUM\EVERCOSS\A74C\V130_TRX_0B1_v130_trx_0b1_4.4.2_KOT49H_14B_test-keys_EVERCOSS_A74C\
Done!
Elapsed: 00:05:48
Reconnect Power/Cable!
#Convert_To_PAC
Operation : Convert InfinitySC to SPRD PAC [ v1.26 ]
Target : V130_TRX_0B1_v130_trx_0b1_4.4.2_KOT49H_14B_test-keys_EVERCOSS_A74C
Step #1 : Identify
MEMORY : eMMC
LAYOUT : eMMC NORMAL
Step #2 : Select logic
Select Logic : SC7731
Step #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[ADD FILE] : logo_480x800.bin
[ADD FILE] : fblogo_480x800.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:01:17
Saved to : V130_TRX_0B1_v130_trx_0b1_4.4.2_KOT49H_14B_test-keys_EVERCOSS_A74C.pac
Done!
Download file-nya dibawah ini :
![]() |
V130_TRX_0B1_v130_trx_0b1_4.4.2_KOT49H_14B_test-keys_EVERCOSS_A74C_4.4_V1.0.0 |
NOTE :
- Free tanpa password
- Laporkan segera jika link diatas mati/rusak
- Jika berkenan tolong tinggalkan sedikit komentar