Monday, 28 May 2018

Firmware Advan I5E Spreadtrum Backup CM2 [Tested]


Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : ADVAN
Device Model   : i5E
Device CPU     : sp9832iea_4m_volte_dt
Device IntName : revo_xx08
Device Version : 5.1
Device Compile : 08/10/2016 09:52:49
Device Project : TCS5050A_Advan_i5E_V0.3_20161008
Device ExtInfo : i5E

*Read Info By CM2 :
Card found: S/N : 8XXXXXXX , v0136
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC983x] eMMC [Generic Android 5.x]

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name  : revo_xx08
Model Brand : ADVAN
Model Device: i5E
AndrVersion : 5.1
BaseBand CPU: SP9832IEA_4M_VOLTE_DT
CompileDate : 08/10/2016 09:52:49
Project Ver : TCS5050A_Advan_i5E_V0.3_20161008
Model Ext   : i5E

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:40

Reconnect Power/Cable!

*Read Firmware By CM2 :
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

 ====  Wait for phone...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : revo_xx08
Model Brand : ADVAN
Model Device: i5E
AndrVersion : 5.1
BaseBand CPU: SP9832IEA_4M_VOLTE_DT
Project Ver : TCS5050A_Advan_i5E_V0.3_20161008
Model Ext   : i5E

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1594 MiB
Saved to : C:\BACKUP SPREADTRUM\ADVAN I5E\SP9832IEA_4M_VOLTE_DT_i5E_5.1_TCS5050A_Advan_i5E_V0.3_20161008_i5E\
Done!

Elapsed: 00:10:17

Reconnect Power/Cable!

*Read NV By CM2 :
Operation : Read NV [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 11 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9830 eMMC Generic Loader v2 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read LTEx NV #1

Read Ok , 0x1AC6B
Saved to : C:\BACKUP SPREADTRUM\ADVAN I5E\CX77xx_SPDNV.spdnv

Elapsed: 00:00:39

Reconnect Power/Cable!

*Convert File To .PAC 
Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : SP9832IEA_4M_VOLTE_DT_i5E_5.1_TCS5050A_Advan_i5E_V0.3_20161008_i5E
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC9832

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_l.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sharkl_cp1.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : l__WPH_arm7.bin
[ADD FILE] : PM_arm7_sys.bin
[ADD FILE] : logo_720x1280.bin
[ADD FILE] : fblogo_720x1280.bin
[ADD FILE] : wcn_fdl.bin
[ADD FILE] : AA_MARLIN.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : oem.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x001A
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:58

Saved to : SP9832IEA_4M_VOLTE_DT_i5E_5.1_TCS5050A_Advan_i5E_V0.3_20161008_i5E.pac
Done!

*Screenshoot :
Read Info By CM2
Read Firmware By CM2
Read NV By CM2
Convert to .PAC File
About Phone
About Phone

Untuk melakukan flashing bisa anda gunakan beberapa tool seperti misalnya tool diatas INFINITY CM2 , Research Download/UPGRADE TOOL dll yang supoort dg spreadtrum .. jika menggunakan RESEARCH DOWNLOAD/UPGRADE TOOL gunakan versi R4.0.00001

Oke untuk file-nya silahkan download dibawah ini :
SP9832IEA_4M_VOLTE_DT_i5E_5.1_TCS5050A_Advan_i5E_V0.3_20161008_i5E
NOTE :
  • File ini berpassword,jika butuh silahkan inbox ke fb admin
  • Segera laporkan jika link diatas mati/rusak
  • Apabila berkenan tolong tinggalkan sedikit komentar secukup-nya saja

Sunday, 27 May 2018

Firmware Evercoss C8 Backup CM2 [Tested]



*Read Info By CM2 :
Card found: S/N : 88766B90 , v0136
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SPD6531

Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000

Elapsed: 00:00:11

Reconnect Power/Cable!

*Read Firmware By CM2 :
Card found: S/N : 88766B90 , v0136
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SPD6531

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo : 
Model Vendor : Evercoss
Model Name   : Evercoss C8
ExtInfo Data : Indonesia
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_W25Q32_Indonesia__Evercoss-Evercoss C8.bin
Done!

Elapsed: 00:01:26

Reconnect Power/Cable!

*Read NV By CM2 :
Card found: S/N : 88766B90 , v0136
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SPD6531

Operation : Read NV [ v1.27 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
Check data ... 
Reading NV ... 
Saved to : C:\BACKUP SPREADTRUM\EVERCOSS C6\6531_NV_00008000.nv

Elapsed: 00:00:21

Reconnect Power/Cable!

*Screenshoot :
Read Info By CM2
Read Firmware By CM2
Read NV By CM2

Oke untuk file-nya silahkan download dibawah ini:
SPD6531_00400000_W25Q32_Indonesia__Evercoss-Evercoss_C8

NOTE :
  • Password : everc8.sip
  • Segera laporkan ke admin jika link diatas mati/rusak
  • Apabila berkenan tolong tinggalkan sedikit komentar secukup-nya saja

Wednesday, 9 May 2018

Firmware Sony Xperia M4 Aqua Dual E2312 [Tested]


NETWORKTechnologyGSM / HSPA / LTE
LAUNCHAnnounced2015, March
StatusAvailable. Released 2015, June
BODYDimensions145.5 x 72.6 x 7.3 mm (5.73 x 2.86 x 0.29 in)
Weight135 g (4.76 oz)
SIMDual SIM (Nano-SIM, dual stand-by)
- IP68 certified - dust/water proof (up to 1.5m for 30 mins)
DISPLAYTypeIPS LCD capacitive touchscreen, 16M colors
Size5.0 inches, 68.9 cm2 (~65.2% screen-to-body ratio)
Resolution720 x 1280 pixels, 16:9 ratio (~294 ppi density)
MultitouchYes, up to 4 fingers
ProtectionScratch-resistant glass
PLATFORMOSAndroid 5.0 (Lollipop), planned upgrade to 6.0 (Marshmallow)
ChipsetQualcomm MSM8939 Snapdragon 615
CPUOcta-core (4x1.5 GHz Cortex-A53 & 4x1.0 GHz Cortex-A53)
GPUAdreno 405
MEMORYCard slotmicroSD, up to 256 GB (dedicated slot)
Internal8 GB, 2 GB RAM/ 16 GB (E2333, E2363)
CAMERAPrimary13 MP, f/2.0, autofocus, LED flash
FeaturesGeo-tagging, touch focus, face/smile detection, HDR, panorama
Video1080p@30fps
Secondary5 MP, 720p
SOUNDAlert typesVibration; MP3, WAV ringtones
LoudspeakerYes
3.5mm jackYes
- Active noise cancellation with dedicated mic
COMMSWLANWi-Fi 802.11 a/b/g/n, dual-band, Wi-Fi Direct, DLNA, hotspot
Bluetooth4.1, A2DP
GPSYes, with A-GPS, GLONASS
NFCYes
RadioFM radio, RDS
USBmicroUSB 2.0
FEATURESSensorsAccelerometer, proximity, compass
MessagingSMS(threaded view), MMS, Email, IM, Push Email
BrowserHTML5
- ANT+ support
- MP4/H.264 player
- MP3/eAAC+/WAV player
- Document viewer
- Photo/video editor
BATTERYNon-removable Li-Ion 2400 mAh battery
Stand-byUp to 493 h (2G) / Up to 488 h (3G)
Talk timeUp to 12 h 40 min (2G) / Up to 13 h 20 min (3G)
Music playUp to 64 h 40 min
MISCColorsBlack, White, Coral, Silver
SAR1.00 W/kg (head)     1.19 W/kg (body)    
SAR EU0.59 W/kg (head)     0.53 W/kg (body)    
PriceAbout 200 EUR


Oke untuk firmware-nya silahkan download dibawah ini :
E2312_26.3.B.1.33_E2312_Customized VN_1298-6195_R1C
NOTE :
  • File diatas gratis tanpa password 
  • Segera laporkan jika link diatas mati/rusak
  • Apabila berkenan tolong tinggalkan sedikit komentar secukup-nya saja