Tuesday, 23 January 2018

Firmware Lenovo Phab Pb1-750M Backup CM2 [Tested]


Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Lenovo
Device Manufact.: LENOVO
Device Model    : PB1-750M
Device CPU      : MSM8916
Device IntName  : PB1-750M
Device Version  : 6.0.1
CU_SWVer        : LENOVO
Device Compile  : 1/7/2017 6:33:46 AM
Device ExtInfo  : Lenovo PB1-750M

Oke langsung download saja file-nya dibawah ini :
LENOVO__ANDR_v6.0.1__PB1-750M
NOTE :
  • Konfirmasi terlebih dahulu untuk bertanya password pada admin
  • Laporkan segera jika link diatas mati/rusak
  • Apabila berkenan tolong tinggalkan sedikit komentar secukup-nya

Saturday, 13 January 2018

Firmware Oppo A33W [Neo 7] Backup CM2 Tested



Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : OPPO
Device Model   : A33w
Device CPU     : MT6582
Device IntName : A33w
Device Version : 5.1
Device Compile : 28/03/2017 12:03:29
Device Project : A33wEX_11_A.23_170328
Device ExtInfo : A33w


*Read Info By CM2
Card found : S/N : 88766B90 , v0136
Chinese Miracle II  [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2016-06-15.11:02
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463331324D4206BE2C966E13F3
Initialize Memory ... 
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM213
[eMMC] : FLASH_CID : 150100463331324D4206BE2C966E13F3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xF0205F824D949920B6F48C971ADCD189
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : OPPO
ProdName  : A33w
ProdModel : A33w
Device    : A33w
AndroidVer: 5.1
MTKxCPU   : MT6582
MTKxPRJ   : A33wEX_11_A.23_170328

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

*Read Firmware By CM2
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2016-06-15.11:02
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463331324D4206BE2C966E13F3
Initialize Memory ... 
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM213
[eMMC] : FLASH_CID : 150100463331324D4206BE2C966E13F3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xF0205F824D949920B6F48C971ADCD189
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 
USBDL : Init HSUSB Ok!

Brand     : OPPO
ProdName  : A33w
ProdModel : A33w
Device    : A33w
AndroidVer: 5.1
MTKxCPU   : MT6582
MTKxPRJ   : A33wEX_11_A.23_170328

[Read Ok] : preloader_oppo6582_15093.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : EBR3
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / oppo6582_15093 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2520 MiB
Scatter saved to : C:\BACKUP SCATTER\OPPO A33W\MT6582__OPPO__A33w__A33w__5.1__A33wEX_11_A.23_170328\

All done!

Done!
Elapsed: 00:10:26
Reconnect Power/Cable!

*Read NV By CM2
Operation : Read NVRAM [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2016-06-15.11:02
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463331324D4206BE2C966E13F3
Initialize Memory ... 
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM213
[eMMC] : FLASH_CID : 150100463331324D4206BE2C966E13F3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xF0205F824D949920B6F48C971ADCD189
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

USBDL : Init HSUSB Ok
NVM Read Ok, MT6582_eMMC.spnv

Done!
Elapsed: 00:00:40
Reconnect Power/Cable!

*Sreenchoot Image
Read Info By CM2
Read Firmware By CM2
Read NV By CM2
About Phone

Oke langsung download saja untuk file-nya dibawah ini :
MT6582__OPPO__A33w__A33w__5.1__A33wEX_11_A.23_170328
NOTE :
  • Konfirmasikan password terlebih dahulu pada admin jika butuh file-nya 
  • Laporkan segera saja jika link diatas mati/rusak
  • Bilamana berkenan tolong tinggalkan sedikit komentar secukup-nya

Tuesday, 9 January 2018

Firmware Acer Liquid Z630S T04 Backup CM2 [Tested]



Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : acer
Device Model   : acer_t04
Device CPU     : MT6735
Device IntName : T04_aap_gen1
Device Version : 5.1
Device Compile : 12/15/2015 3:15:14 PM
Device Project : Acer_AV0L0_T04_1.016.00_AAP_GEN1
Device ExtInfo : T04

Oke download langsung saja file-nya dibawah ini :
MT6735__acer__T04__acer_t04__5.1__Acer_AV0L0_T04_1.016.00_AAP_GEN1

NOTE :
  • Konfirmasi password ke facebook admin lebih dulu jika butuh file diatas
  • Laporkan langsung jika link diatas mati/rusak
  • Jika berkenan tolong tinggalkan sedikit komentar secukup-nya

Tuesday, 2 January 2018

Firmware ZTE Blade L5 Plus CM2 Backup File [Tested]



Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : ZTE
Device Model   : P680A20
Device CPU     : MT6580
Device IntName : P680A20_ASIA_CHANNEL
Device Version : 5.1
Device Compile : 05.04.2016 5:53:25
Device Project : ALPS.L1.MP6.V2_RGK6580.WE.L_P77
Device ExtInfo : ZTE BLADE L0510



Oke langsung download saja file-nya dibawah ini :
MT6580__ZTE__ZTE_BLADE_L0510__P680A20__5.1__ALPS.L1.MP6.V2_RGK6580.WE.L_P77

NOTE :
  • Konfirmasi password file dulu ke admin jika butuh file-nya
  • Laporkan segera jika link diatas mati/rusak
  • Jika berkenan tolong tinggalkan sedikit komentar secukup-nya