Firmware ZTE Blade L5 Plus CM2 Backup File [Tested]

Brand: ZTE 
ProdName: P680A20_ASIA_CHANNEL 
ProdModel: ZTE BLADE L0510 
Device: P680A20 
AndroidVer: 5.1 
MTKxCPU: MT6580 
MTKxPRJ: ALPS.L1.MP6.V2_RGK6580.WE.L_P77


Download file-nya dibawah ini :

MT6580__ZTE__ZTE_BLADE_L0510__P680A20__5.1__ALPS.L1.MP6.V2_RGK6580.WE.L_P77

NOTE :

• Silahkan konfimasi password file ke admin jika anda membutuhkan-nya
• Laporkan segera jika link diatas mati/rusak
• Kalau berkenan tolong tinggalkan sedikit komentar secukup-nya

Read More

Firmware Lenovo S820 8Gb Backup CM2 [Tested Flash File]

*Created by Infinity-Box (c) Chinese Miracle II (c) 2016

Device Brand   : Lenovo
Device Model   : S820_ROW
Device CPU     : MT6589
Device IntName : S820_ROW
Device Version : 4.4.2
Device Compile : 21.11.2014 3:02:03
Device Project : S820_ROW_8G_S222_141121
Device ExtInfo : Lenovo S820

*MediaTek Device Info list

Created by Infinity-Box (c) Chinese Miracle II (c) 2016

Modem Version : mt6589_md1_hspa_swarovski_row
Localization  : zh_CN zh_TW en_US
DisplayRes    : 1280 #800 x 720 #480
Supported LCD : 
r61308_hd720_dsi_vdo_yassy
nt35590_hd720_dsi_cmd_cmi
nt35590_hd720_dsi_cmd_yassy
Supported DGT : 
ft5206_s820
Supported CAM : 
ov12830_mipi_raw
ov2659_raw
Supported BootLoader HW : 

FlashID [0] CID : 90014A2058494E5948 , Name :  XINYH , Vendor : 90 , [HYNIX]

FlashID [1] CID : 1501004B375530304D , Name : K7U00M , Vendor : 15 , [SAMSUNG]

*Operation : Read Flash [ v1.41 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 14 ]
Sync...

Inital Boot Ok!
BB_CPU_PID : 6583
BB_CPU_NME : [MediaTek] MT6583|6589_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x86

NAND Flash : NOT INSTALLED

eMMC Flash : 4B000115303055375AE8084D1F90A574

Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , M00U7
[eMMC] : FLASH_CID : 1501004B375530304D08E85A74A5901F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000001D2000000

[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]

DEV RID : 2B7644739D23C744B45E0DED040DA6D2

INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1

Boot Ok!

Reading Flash Conent now ... 

Brand : Lenovo
ProdName : S820_ROW
ProdModel : Lenovo S820
Device : S820_ROW
AndroidVer: 4.4.2
MTKxCPU : MT6589
MTKxPRJ : S820_ROW_8G_S222_141121

[Read Ok] : preloader_s820i_row.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : preload.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / s820i_row / EMMC

Android Info saved
MAUI Meta DB saved 

HWConfig Info saved 

FW Size: 1028 MiB 

Scatter saved to: C: \ Backup Scatter \ Lenovo S820 8Gb \ MT6589__Lenovo__Lenovo _S820__S820_ROW__4.4.2__S820_ROW_8G_S222_141121 \ 

All done! 

Done! 

Elapsed: 00:06:58

Oke ,langsung saja download file-nya dibawah ini :

MT6589__Lenovo__Lenovo_S820__S820_ROW__4.4.2__S820_ROW_8G_S222_141121

NOTE :

• Konfirmasi password file kepada admin dulu jika anda membutuhkan
• Laporkan saja jika link diatas mati/rusak
• Jika berkenan tolong tinggalkan sedikit komentar secukup-nya

Read More

Firmware Acer E1 V360 Backup CM2 [Tested]

Oke langsung saja download file-nya dibawah ini :

MT6577__acer__V360__C10__4.1.1__ALPS.JB.MP.V1

NOTE :

• Jika membutuhkan file-nya silahkan konfirmasi password dulu dengan admin
• Laporkan langsung jika link diatas jika mati/rusak
• Kalau boleh berkenan tolong tinggalkan sedikit komentar secukup-nya

Read More

Firmware Lenovo Vibe Shoot Z90a40 Backup CM2 [Tested]

Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : Lenovo
Device Manufact.: LENOVO
Device Model    : zoom_row
Device CPU      : MSM8916
Device IntName  : zoom_row
Device Version  : 6.0.1
CU_SWVer        : LENOVO
Device Compile  : 24.06.2016 21:19:23
Device Project  : Z90a40_USR_S363_1606250500_Q202533.1_ROW
Device ExtInfo  : Lenovo Z90a40

Oke langsung saja download file-nya dibawah ini :

MSM8916__LENOVO__Lenovo__ANDR_v6.0.1__Lenovo_Z90a40

NOTE :

• Konfirmasi password terlebih dahulu jika membutuhkan file diatas
• Segera laporkan jika link diatas mati/rusak
• Jika berkenan tolong tinggalkan sedikit komentar secukupnya 

Read More

Firmware Evercoss Winner Y Max A75 Backup CM2 [Tested]

#Read_Info_By_CM2
Card found: S/N : 8XXXXXXX , v0136
Chinese Miracle II  [SPD module] v 1.26

Set mode to : SP [SC773x] eMMC [Generic]

Operation : Check/Read Info [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 39 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name  : sp7731gea_hdrplus_dt
Model Brand : EVERCOSS
Model Device: scx35_sp7731gea_lm_fs031
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
CompileDate : 18/11/2015 06:50:20
Project Ver : EVERCOSS_A75_V05_5.1_18-11-2015
Model Ext   : A75

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:40

Reconnect Power/Cable!

#Read_Flash_By_CM2

Operation : Read FullFlash [ v1.26 ]

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable

 ====  Wait for phone...

Phone found! [ 39 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SPRD 773x eMMC loader v3 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ... 

Phone found! [ 39 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SPRD 773x eMMC loader v3 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

- > Wait phone connected ... 

Phone found! [ 39 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SPRD 773x eMMC loader v3 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : sp7731gea_hdrplus_dt

Model Brand : EVERCOSS

Model Device: scx35_sp7731gea_lm_fs031

AndrVersion : 5.1

BaseBand CPU: SP7731GEA_HDR

Project Ver : EVERCOSS_A75_V05_5.1_18-11-2015

Model Ext   : A75

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731g_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 1633 MiB

Saved to : C:\BACKUP SPREADTRUM\EVERCOSS A75\SP7731GEA_HDR_scx35_sp7731gea_lm_fs031_5.1_EVERCOSS_A75_V05_5.1_18-11-2015_A75\

Done!

Elapsed: 00:11:30

Reconnect Power/Cable!

#Read_NV_By_CM2

Operation : Read NV [ v1.26 ]

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable

 ====  Wait for phone...

Phone found! [ 39 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SPRD 773x eMMC loader v3 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read GSM NV

Read WCN NV

Read Ok , 0xA596

Saved to : C:\BACKUP SPREADTRUM\EVERCOSS A75\CX77xx_SPDNV.spdnv

Elapsed: 00:00:39

Reconnect Power/Cable!

#Screenshoot

Read Info By CM2

Read Flash By CM2

Read NV By CM2

Info By Sticker Label

About Phone Evercoss A75

Oke,langsung saja download file-nya dibawah ini :

SP7731GEA_HDR_scx35_sp7731gea_lm_fs031_5.1_EVERCOSS_A75_V05_5.1_18-11-2015_A75

NOTE :

• Silahkan konfimasi terlebih dahulu bertanya password ke facebook admin
• Laporkan saja jika link diatas mati/rusak
• Jika berkenan tolong tinggalkan sedikit komentar secukup-nya

Read More

Firmware Lava A77 Backup CM2 [Tested File]

       Firmware ini adalah file hasil backup saya sendiri dari hp normal tentunya LAVA A77 ,dan dibawah ini akan saya tampilkan sedikit cuplikan screenshoot mengenai info spesifikasi hp LAVA A77 tersebut ,dan tentunya hasil backup tersebut sudah saya konversi ke file .PAC agar bisa di flashing menggunakan tool SPDUpgrade tool/Upgrade Download,berikut cuplikan tersebut :

Hasil Backup Via CM2

Deteil Spesifikasi Lava A77

Hasil Konversi Ke File .PAC

Oke langsung saja download file-nya dibawah ini :

SP9832A_2H11_VOLTE_A77_6.0_Lava_A77_S107_20170614_A77

NOTE :

• Gunakan tool flash versi ini yang compatible dan cari di google UPGRADEDOWNLOAD_R17.0.0001
• File free ,tanpa password
• Jika link diatas mati/rusak segera laporkan admin
• Jika bekenan tolong tinggalkan sedikit komentar secukupnya

Read More

Firmware Oppo Find Way S U707 [Tested Unbricked Phone]

      File ini adalah file tested ,karena saya sudah pernah mengerjakan-nya ,jika anda butuh file-nya silahkan download saja di bawh ini :

U707_11_A.03_131017

NOTE :

• File free tanpa password
• Untuk menjaga keamanan dari kematotan ,lakukan backup firmware terlebih dahulu
• Flash tanpa preloader
• Laporkan jika link ditas mati/rusak
• Jika berkenan tolong tinggalkan sedikit komentar secukup-nya 

Read More

Firmware Xiaomi Redmi Note 2 Prime [Hermes 32GB ] Tested Flash File

#Read_Info_By_CM2
Card found : S/N : 8XXXXXXX , v0136
Chinese Miracle II  [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 20 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6795
BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x92
NAND Flash : NOT INSTALLED
eMMC Flash : 1101003033324737340075940BC872C5
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 47G23
[eMMC] : FLASH_CID : 1101003033324737340075940BC872C5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xF0205F822F7498C4468FD4002D36660E
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P228

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!


#Read_Firmware_By_CM2
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 20 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6795
BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x92
NAND Flash : NOT INSTALLED
eMMC Flash : 1101003033324737340075940BC872C5
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 47G23
[eMMC] : FLASH_CID : 1101003033324737340075940BC872C5
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xF0205F822F7498C4468FD4002D36660E
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P228

[Read Ok] : preloader_lcsh6795_lwt_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6795 / V1.1.2 / lcsh6795_lwt_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2216 MiB
Scatter saved to : C:\BACKUP SCATTER\XIAOMI REDMI NOTE 2\MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P228\

All done!

Done!
Elapsed: 00:09:31
Reconnect Power/Cable!

#Read_NV_By_CM2 

Operation : Read NVRAM [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 20 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6795

BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.3.2 on BBID : 0x92

NAND Flash : NOT INSTALLED

eMMC Flash : 1101003033324737340075940BC872C5

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x11 , OEM : 0100

[eMMC] : FLASH_INF : [TOSHIBA] , 47G23

[eMMC] : FLASH_CID : 1101003033324737340075940BC872C5

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x0000000747C00000

[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]

DEV RID    : 0xF0205F822F7498C4468FD4002D36660E

INT RAM    : 0x00020000

EXT RAM    : 0x80000000 [2 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[Info] : BaseBand : MT6795_S00_MOLY_LR9_W1423_MD_LWTG_MP_V24_P58_1_ltg_n

NVM Read Ok, MT6795_S00_MOLY_LR9_W1423_MD_LWTG_MP_V24_P58_1_ltg_n_eMMC.spnv

Done!

Elapsed: 00:00:32

Reconnect Power/Cable!

#Screenshoot_Images

Read Info By CM2

Read Firmware By CM2

Read NV By CM2

Langsung saja download file-nya dibawah ini :

MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P228

NOTE :

• Silahkan konfirmasi password file via facebook admin
• Segera laporkan jika link diatas mati/rusak
• Jika berkenan tolong tinggalkan sedikit komentar secukupnya

Read More

Firmware Vivo Y51 PD1510F [Tested For Unbricked Phone]

Langsung saja download file-nya dibawah ini :

PD1510F_EX_A_1.17.1_vivo_qcom_LA.BR.1.2.1-01210-8x16.0_msm8939.tar.gz

NOTE :

• Free flash file
• Segera laporkan jika link diatas mati/rusak
• Jika berkenan tolong tinggalkan sedikit komentar secukup-nya

Read More