Friday, 29 December 2017

Firmware ZTE Blade L5 Plus CM2 Backup File [Tested]


Brand: ZTE 
ProdName: P680A20_ASIA_CHANNEL 
ProdModel: ZTE BLADE L0510 
Device: P680A20 
AndroidVer: 5.1 
MTKxCPU: MT6580 
MTKxPRJ: ALPS.L1.MP6.V2_RGK6580.WE.L_P77


Download file-nya dibawah ini :
MT6580__ZTE__ZTE_BLADE_L0510__P680A20__5.1__ALPS.L1.MP6.V2_RGK6580.WE.L_P77
NOTE :
  • Silahkan konfimasi password file ke admin jika anda membutuhkan-nya
  • Laporkan segera jika link diatas mati/rusak
  • Kalau berkenan tolong tinggalkan sedikit komentar secukup-nya

Thursday, 28 December 2017

Firmware Lenovo S820 8Gb Backup CM2 [Tested Flash File]


*Created by Infinity-Box (c) Chinese Miracle II (c) 2016


Device Brand   : Lenovo

Device Model   : S820_ROW
Device CPU     : MT6589
Device IntName : S820_ROW
Device Version : 4.4.2
Device Compile : 21.11.2014 3:02:03
Device Project : S820_ROW_8G_S222_141121
Device ExtInfo : Lenovo S820

*MediaTek Device Info list


Created by Infinity-Box (c) Chinese Miracle II (c) 2016


Modem Version : mt6589_md1_hspa_swarovski_row
Localization  : zh_CN zh_TW en_US
DisplayRes    : 1280 #800 x 720 #480
Supported LCD : 
r61308_hd720_dsi_vdo_yassy
nt35590_hd720_dsi_cmd_cmi
nt35590_hd720_dsi_cmd_yassy
Supported DGT : 
ft5206_s820
Supported CAM : 
ov12830_mipi_raw
ov2659_raw
Supported BootLoader HW : 

FlashID [0] CID : 90014A2058494E5948 , Name :  XINYH , Vendor : 90 , [HYNIX]


FlashID [1] CID : 1501004B375530304D , Name : K7U00M , Vendor : 15 , [SAMSUNG]


*Operation : Read Flash [ v1.41 ]


1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 14 ]
Sync...

Inital Boot Ok!

BB_CPU_PID : 6583
BB_CPU_NME : [MediaTek] MT6583|6589_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.3.2 on BBID : 0x86

NAND Flash : NOT INSTALLED


eMMC Flash : 4B000115303055375AE8084D1F90A574


Initialize Memory ... 

DRAM already initialized by Preloader
eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100


[eMMC] : FLASH_INF : [SAMSUNG] , M00U7

[eMMC] : FLASH_CID : 1501004B375530304D08E85A74A5901F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000001D2000000


[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]


DEV RID : 2B7644739D23C744B45E0DED040DA6D2


INT RAM : 0x00020000

EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1

Boot Ok!


Reading Flash Conent now ... 


Brand : Lenovo

ProdName : S820_ROW
ProdModel : Lenovo S820
Device : S820_ROW
AndroidVer: 4.4.2
MTKxCPU : MT6589
MTKxPRJ : S820_ROW_8G_S222_141121

[Read Ok] : preloader_s820i_row.bin

[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : preload.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / s820i_row / EMMC

Android Info saved

MAUI Meta DB saved 

HWConfig Info saved 


FW Size: 1028 MiB 


Scatter saved to: C: \ Backup Scatter \ Lenovo S820 8Gb \ MT6589__Lenovo__Lenovo _S820__S820_ROW__4.4.2__S820_ROW_8G_S222_141121 \ 


All done! 


Done! 


Elapsed: 00:06:58


Oke ,langsung saja download file-nya dibawah ini :
MT6589__Lenovo__Lenovo_S820__S820_ROW__4.4.2__S820_ROW_8G_S222_141121

NOTE :

  • Konfirmasi password file kepada admin dulu jika anda membutuhkan
  • Laporkan saja jika link diatas mati/rusak
  • Jika berkenan tolong tinggalkan sedikit komentar secukup-nya

    Wednesday, 27 December 2017

    Firmware Lenovo Vibe Shoot Z90a40 Backup CM2 [Tested]


    Created by Infinity-Box (c) Chinese Miracle II (c) 2017

    Device Brand    : Lenovo
    Device Manufact.: LENOVO
    Device Model    : zoom_row
    Device CPU      : MSM8916
    Device IntName  : zoom_row
    Device Version  : 6.0.1
    CU_SWVer        : LENOVO
    Device Compile  : 24.06.2016 21:19:23
    Device Project  : Z90a40_USR_S363_1606250500_Q202533.1_ROW
    Device ExtInfo  : Lenovo Z90a40


    Oke langsung saja download file-nya dibawah ini :
    MSM8916__LENOVO__Lenovo__ANDR_v6.0.1__Lenovo_Z90a40
    NOTE :
    • Konfirmasi password terlebih dahulu jika membutuhkan file diatas
    • Segera laporkan jika link diatas mati/rusak
    • Jika berkenan tolong tinggalkan sedikit komentar secukupnya 

    Saturday, 23 December 2017

    Firmware Evercoss Winner Y Max A75 Backup CM2 [Tested]

    #Read_Info_By_CM2
    Card found: S/N : 8XXXXXXX , v0136
    Chinese Miracle II  [SPD module] v 1.26

    Set mode to : SP [SC773x] eMMC [Generic]

    Operation : Check/Read Info [ v1.26 ]

    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    3. Insert cable

     ====  Wait for phone...

    Phone found! [ 39 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FLASH : eMMC Flash , Structure : Ok!

    Reading extended info ...

    Model Name  : sp7731gea_hdrplus_dt
    Model Brand : EVERCOSS
    Model Device: scx35_sp7731gea_lm_fs031
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    CompileDate : 18/11/2015 06:50:20
    Project Ver : EVERCOSS_A75_V05_5.1_18-11-2015
    Model Ext   : A75

    ExtraInfo : HWInfo not exists, normal phone

    Elapsed: 00:00:40

    Reconnect Power/Cable!


    #Read_Flash_By_CM2
    Operation : Read FullFlash [ v1.26 ]

    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    3. Insert cable

     ====  Wait for phone...

    Phone found! [ 39 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!

    [FW_READER] : Prepare Ok!
    - > Wait phone connected ... 

    Phone found! [ 39 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    - > Wait phone connected ... 

    Phone found! [ 39 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731gea_hdrplus_dt
    Model Brand : EVERCOSS
    Model Device: scx35_sp7731gea_lm_fs031
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : EVERCOSS_A75_V05_5.1_18-11-2015
    Model Ext   : A75

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now ... 

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1633 MiB
    Saved to : C:\BACKUP SPREADTRUM\EVERCOSS A75\SP7731GEA_HDR_scx35_sp7731gea_lm_fs031_5.1_EVERCOSS_A75_V05_5.1_18-11-2015_A75\
    Done!

    Elapsed: 00:11:30

    Reconnect Power/Cable!


    #Read_NV_By_CM2
    Operation : Read NV [ v1.26 ]

    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    3. Insert cable

     ====  Wait for phone...

    Phone found! [ 39 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Detected eMMC Flash , Structure detect Ok!

    Read GSM NV
    Read WCN NV

    Read Ok , 0xA596
    Saved to : C:\BACKUP SPREADTRUM\EVERCOSS A75\CX77xx_SPDNV.spdnv

    Elapsed: 00:00:39

    Reconnect Power/Cable!


    #Screenshoot
    Read Info By CM2
    Read Flash By CM2
    Read NV By CM2

    Info By Sticker Label

    About Phone Evercoss A75

    Oke,langsung saja download file-nya dibawah ini :
    SP7731GEA_HDR_scx35_sp7731gea_lm_fs031_5.1_EVERCOSS_A75_V05_5.1_18-11-2015_A75

    NOTE :
    • Silahkan konfimasi terlebih dahulu bertanya password ke facebook admin
    • Laporkan saja jika link diatas mati/rusak
    • Jika berkenan tolong tinggalkan sedikit komentar secukup-nya













    Tuesday, 12 December 2017

    Firmware Lava A77 Backup CM2 [Tested File]


           Firmware ini adalah file hasil backup saya sendiri dari hp normal tentunya LAVA A77 ,dan dibawah ini akan saya tampilkan sedikit cuplikan screenshoot mengenai info spesifikasi hp LAVA A77 tersebut ,dan tentunya hasil backup tersebut sudah saya konversi ke file .PAC agar bisa di flashing menggunakan tool SPDUpgrade tool/Upgrade Download,berikut cuplikan tersebut :

    Hasil Backup Via CM2

    Deteil Spesifikasi Lava A77

    Hasil Konversi Ke File .PAC

    Oke langsung saja download file-nya dibawah ini :
    SP9832A_2H11_VOLTE_A77_6.0_Lava_A77_S107_20170614_A77

    NOTE :
    • Gunakan tool flash versi ini yang compatible dan cari di google UPGRADEDOWNLOAD_R17.0.0001
    • File free ,tanpa password
    • Jika link diatas mati/rusak segera laporkan admin
    • Jika bekenan tolong tinggalkan sedikit komentar secukupnya

    Saturday, 9 December 2017

    Firmware Oppo Find Way S U707 [Tested Unbricked Phone]

          File ini adalah file tested ,karena saya sudah pernah mengerjakan-nya ,jika anda butuh file-nya silahkan download saja di bawh ini :
    U707_11_A.03_131017

    NOTE :
    • File free tanpa password
    • Untuk menjaga keamanan dari kematotan ,lakukan backup firmware terlebih dahulu
    • Flash tanpa preloader
    • Laporkan jika link ditas mati/rusak
    • Jika berkenan tolong tinggalkan sedikit komentar secukup-nya 

    Friday, 8 December 2017

    Firmware Xiaomi Redmi Note 2 Prime [Hermes 32GB ] Tested Flash File

    #Read_Info_By_CM2
    Card found : S/N : 8XXXXXXX , v0136
    Chinese Miracle II  [MTK module] v 1.58

    Operation : Check / Read Info [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 20 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6795
    BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.3.2 on BBID : 0x92
    NAND Flash : NOT INSTALLED
    eMMC Flash : 1101003033324737340075940BC872C5
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x11 , OEM : 0100
    [eMMC] : FLASH_INF : [TOSHIBA] , 47G23
    [eMMC] : FLASH_CID : 1101003033324737340075940BC872C5
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x0000000747C00000
    [eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
    DEV RID    : 0xF0205F822F7498C4468FD4002D36660E
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000 [2 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand     : Xiaomi
    ProdName  : hermes
    ProdModel : Redmi Note 2
    Device    : hermes
    AndroidVer: 5.0.2
    MTKxCPU   : MT6795
    MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P228

    Done!
    Elapsed: 00:00:21
    Reconnect Power/Cable!


    #Read_Firmware_By_CM2
    Operation : Read Flash [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 20 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6795
    BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.3.2 on BBID : 0x92
    NAND Flash : NOT INSTALLED
    eMMC Flash : 1101003033324737340075940BC872C5
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x11 , OEM : 0100
    [eMMC] : FLASH_INF : [TOSHIBA] , 47G23
    [eMMC] : FLASH_CID : 1101003033324737340075940BC872C5
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x0000000747C00000
    [eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
    DEV RID    : 0xF0205F822F7498C4468FD4002D36660E
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000 [2 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now ... 

    xGPT : Normalize settings Ok!

    Brand     : Xiaomi
    ProdName  : hermes
    ProdModel : Redmi Note 2
    Device    : hermes
    AndroidVer: 5.0.2
    MTKxCPU   : MT6795
    MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P228

    [Read Ok] : preloader_lcsh6795_lwt_l.bin
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : tz1.img
    [Read Ok] : tz2.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6795 / V1.1.2 / lcsh6795_lwt_l / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 2216 MiB
    Scatter saved to : C:\BACKUP SCATTER\XIAOMI REDMI NOTE 2\MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P228\

    All done!

    Done!
    Elapsed: 00:09:31
    Reconnect Power/Cable!


    #Read_NV_By_CM2 
    Operation : Read NVRAM [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 20 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6795
    BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.3.2 on BBID : 0x92
    NAND Flash : NOT INSTALLED
    eMMC Flash : 1101003033324737340075940BC872C5
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x11 , OEM : 0100
    [eMMC] : FLASH_INF : [TOSHIBA] , 47G23
    [eMMC] : FLASH_CID : 1101003033324737340075940BC872C5
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x0000000747C00000
    [eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
    DEV RID    : 0xF0205F822F7498C4468FD4002D36660E
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000 [2 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [Info] : BaseBand : MT6795_S00_MOLY_LR9_W1423_MD_LWTG_MP_V24_P58_1_ltg_n

    NVM Read Ok, MT6795_S00_MOLY_LR9_W1423_MD_LWTG_MP_V24_P58_1_ltg_n_eMMC.spnv

    Done!
    Elapsed: 00:00:32
    Reconnect Power/Cable!


    #Screenshoot_Images
    Read Info By CM2
    Read Firmware By CM2
    Read NV By CM2
    Langsung saja download file-nya dibawah ini :
    MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P228

    NOTE :
    • Silahkan konfirmasi password file via facebook admin
    • Segera laporkan jika link diatas mati/rusak
    • Jika berkenan tolong tinggalkan sedikit komentar secukupnya

    Friday, 1 December 2017

    Thursday, 30 November 2017

    Thursday, 16 November 2017

    Tuesday, 14 November 2017

    Firmware Mito Fantasy A350 Backup CM2 [Tested Flash File]

    #Read_Info_By_CM2
    Card found : S/N : 8XXXXXXX , v0136
    Chinese Miracle II  [MTK module] v 1.58

    Operation : Check / Read Info [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 32 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : FE014E503058585858109FA9BA38A0E5
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0xFE , OEM : 014E
    [eMMC] : FLASH_INF : [MICRON] , XXXX0
    [eMMC] : FLASH_CID : FE014E503058585858109FA9BA38A0E5
    [eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID    : 0xF0205F824BA60000F7AF1E8912C8C479
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000 [512 MiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand     : alps
    ProdName  : MITO A350
    ProdModel : MITO A350
    Device    : MITO A350
    AndroidVer: 4.2.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.JB3.MP.V1.6

    Done!
    Elapsed: 00:00:18
    Reconnect Power/Cable!

    #Read_Firmware_By_Cm2
    Operation : Read Flash [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 32 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : FE014E503058585858109FA9BA38A0E5
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0xFE , OEM : 014E
    [eMMC] : FLASH_INF : [MICRON] , XXXX0
    [eMMC] : FLASH_CID : FE014E503058585858109FA9BA38A0E5
    [eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID    : 0xF0205F824BA60000F7AF1E8912C8C479
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000 [512 MiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now ... 

    Brand     : alps
    ProdName  : MITO A350
    ProdModel : MITO A350
    Device    : MITO A350
    AndroidVer: 4.2.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.JB3.MP.V1.6

    [Read Ok] : preloader_hexing72_wet_jb3.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6572 / V1.1.1 / hexing72_wet_jb3 / EMMC
    Android Info saved
    HWConfig Info saved
    FW Size : 680 MiB
    Scatter saved to : C:\BACKUP SCATTER\MITO A350\MT6572__alps__MITO_A350__MITO_A350__4.2.2__ALPS.JB3.MP.V1.6\

    All done!

    Done!
    Elapsed: 00:04:01
    Reconnect Power/Cable!

    #Read_NV_By_CM2
    Operation : Read NVRAM [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 32 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : FE014E503058585858109FA9BA38A0E5
    Initialize Memory ... 
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0xFE , OEM : 014E
    [eMMC] : FLASH_INF : [MICRON] , XXXX0
    [eMMC] : FLASH_CID : FE014E503058585858109FA9BA38A0E5
    [eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID    : 0xF0205F824BA60000F7AF1E8912C8C479
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000 [512 MiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    NVM Read Ok, MT6572_eMMC.spnv

    Done!
    Elapsed: 00:00:52
    Reconnect Power/Cable!

    #Screenshoot_Images
    Read Info By CM2
    Read Firmware By CM2
    About_Phone

    Langsung saja download firmware-nya dibawah ini :
    MT6572__alps__MITO_A350__MITO_A350__4.2.2__ALPS.JB3.MP.V1.6
    NOTE :
    • File berpassword,silahkan hubungi facebook admin untuk konfirmasi password
    • Laporkan jika link diatas mati/rusak
    • Jika berkenan tolong tinggalkan sedikit komentar secukup-nya